Owner`s manual

You can issue a complete boot specification, or you can use a nickname that
has been defined for a complete boot specification. Issuing BOOT alone will
boot from whatever has been set as the default boot.
When you use the BOOT CSA1 command, you designate the in-cabinet TF
or TK tape drive as your boot device.
Boot device mnemonics are listed in Table 4–4.
Table 4–4: Boot Device Mnemonics
Mnemonic Device Device Type Bus
DIxx KFMSA Disk XMI
DUxx KDB50 Disk VAXBI
KDM70 Disk XMI
CIBCA Disk VAXBI
CIXCD Disk XMI
ETxx DEBNI Disk VAXBI
DEBNA Disk VAXBI
EXxx DEMNA Disk XMI
FXxx DEMFA Disk XMI
MIxx KFMSA Tape XMI
MUxx TBK70 Tape VAXBI
Booting 4–9