Owner`s manual

The I/O bulkhead connections tray is located in the rear of the cabinet,
above the cooling system and I/O panel, and below the power regulators.
It is hinged at the bottom, and folds out and down for servicing the card
cages and backplanes. The I/O panel is on the right side below the tray.
The I/O tray and panel have 30 panel units designed to accommodate a
variety of I/O connectors.
The Ethernet and console terminal connectors are at the bottom of the I/O
panel. The Ethernet port is a 15-pin receptacle located on the bottom right,
and the console terminal port is the 25-pin receptacle on the left. These
connectors are labeled with international symbols, as shown in Figure 2–7.
System Components 2–13