Owner`s manual

2.4 I/O Connections
I/O connections are installed on the bulkhead connections
tray and the I/O panel. The I/O tray is located in the rear of
the cabinet, above the cooling system and below the power
regulators, and covers the XMI backplane. The I/O panel is
just below the right-hand side of the I/O tray and houses the
Ethernet and console terminal ports.
Figure 2–7: Console and Terminal Connectors
I/O 
BULKHEAD
TRAY
I/O PANEL
ETHERNET 
PORT
CONSOLE 
TERMINAL
PORT
msb-0143A-91
REAR
2–12 VAX 6000 Series Owner’s Manual