Owner`s manual

System
airflow sensor, 2–15
architecture, 1–4
configuration, 1–3
footprint, 1–3
front view, 1–8
initialization, 5–35
rear view, 1–10
serial number, 6–15
thermostat, 2–15
typical, 1–7
T
Tape cartridge, B–1 to B–5
handling and storage, B–5
labeling, B–5
write protecting, B–4
Tape drive, in-cabinet, 2–6 to 2–7,
B–1 to B–5
controls and indicators, B–2 to
B–3
loading a tape, B–3
location, 1–8
unloading a tape, B–4
TBK50, D–2
TBK70, D–2
Temperature, 3–13
Terminal connector, 2–13
TF85 tape drive, B–2
TF tape drive, in-cabinet, 2–6 to
2–7
TK tape drive, in-cabinet, 2–6 to
2–7
TM32, D–2
Troubleshooting, 6–1 to 6–21
during booting, 6–18 to 6–19
forcing a boot processor, 6–20 to
6–21
TU81E, D–2
U
ULTRIX booting, 4–12, F–2
V
VAXBI adapters, D–1 to D–2
self-test, 6–17
VAXBI bus, 1–3 to 1–5
VAXBI card cages, 2–16 to 2–17
location, 1–8, 1–10
VAXBI expander cabinet, D–3
VAXBI modules
self-test, 6–17
VAXBI node
initializing, 5–34
VAXcluster booting, 4–12 to 4–15
Vector processor, 5–73
VMB (virtual memory boot), 4–3
VMEbus, 1–5
VMS booting, F–1
Voltages, input,
VAXBI, D–4
XMI, 2–9
X
XMI adapters, 1–12 to 1–13
XMI bus, 1–3 to 1–5, 2–10 to 2–11
node number of boot processor,
4–11
XMI card cage, 2–10 to 2–11
configuration, 2–11
door, 2–11
interlock switch, 2–11
location, 1–8, 1–10
slot numbers, 2–11
XMI modules
LEDs, 2–11, 6–3
self-test, 6–8
XMI node
ID numbers, 2–11
initializing, 5–34
XMI-to-VAXBI adapter
self-test results, 6–17
XTC module
location, 1–10
Index–5