Owner`s manual

* Rewinding tape
?0101 BVP port error reported—aborting
?0102 Controller error detected—aborting
?0103 Drive error detected—aborting
?010E Specified unit offline—No media mounted or disabled via
RUN/STOP switch setting
?0114 Serious exception reported—aborting
?0116 Specified unit is inoperative
?0117 Specified unit offline
?0118 Specified unit offline—Unit unknown, online to another
controller or port disabled via A,B switches
5. * Passing control to transfer address
J.4 CI and DSSI Boot Messages
1. [Start boot]
?002E Specified node is not an I/O adapter
?0109 Illegal adapter specified for CI boot
?011A Illegal adapter specified for DSSI boot
2. * Initializing adapter
?0119 Failure to initialize specified adapter
3. * Specified adapter initialized successfully
4. * Connecting to storage controller
5. * Previous operation failed—retrying CI boot
6. * Previous operation failed—retrying DSSI boot
7. * Port received a "no path" error—retrying the init sequence
?0110 Port received a "no path" error after 6 retries—aborting the
boot process
8. * Connecting to MSCP server layer
9. * Previous operation failed—retrying CI boot
10. * Connecting to boot disk or
* Connecting to shadow unit—will fail over to physical after 6
attempts.
?0102 Controller error detected—aborting
?0103 Drive error detected—aborting
Boot Status and Error Messages (Models 500 and 600) J–3