Owner`s manual

Table G–1 (Cont.): Console Commands and Qualifiers
Command and
Qualifiers Function
SHOW DSSI Displays DSSI bus numbers, node numbers, and unit num-
bers.
SHOW ETHERNET Displays Ethernet hardware addresses for all Ether-
net adapters on the system and FDDI hardware ad-
dresses for all FDDI adapters.
SHOW FIELD
2
Displays saved boot commands, console terminal pa-
rameters, console language mode, memory configura-
tion, type of power system, and system serial num-
ber.
SHOW LANGUAGE Displays the mode currently set for console error mes-
sages, international or English.
SHOW MEMORY Displays the memory lines from the system self-test, show-
ing interleave and memory size.
SHOW TERMINAL Displays the baud rate and terminal characteristics func-
tioning on the console terminal.
START Begins execution of an instruction at the address speci-
fied in the command string.
STOP
/BI:n
Halts the specified node.
TEST
/RBD
Passes control to the self-test diagnostics.
UPDATE Copies contents of the EEPROM on the processor exe-
cuting the command to the EEPROM of another proces-
sor.
Z
/BI:n
Logically connects the console terminal to another proces-
sor on the XMI bus or to a VAXBI node.
! Introduces a comment.
2
The SHOW FIELD command is available only on Model 500 and 600 systems.
Console Commands G–3