Owner`s manual

Table G–1 (Cont.): Console Commands and Qualifiers
Command and
Qualifiers Function
INITIALIZE [n]
/BI:n
Performs a system reset, including self-test.
REPEAT Executes the command passed as its argument.
SET BOOT Stores a boot command by a nickname.
SET CPU [n]
/ENABLED
/ALL
/NOENABLED
/NEXT_PRIMARY
/PRIMARY
/ALL
/NOPRIMARY
/VECTOR_ENABLED
/NOVECTOR_ENABLED
Specifies eligibility of processors to become the boot pro-
cessor or disables a vector processor.
1
SET LANGUAGE
ENGLISH
INTERNATIONAL
Changes the output of the console error messages between
numeric code only (international mode) and code plus expla-
nation (English mode).
SET MEMORY
/CONSOLE_LIMIT:n
/INTERLEAVE:(n+n...)
/INTERLEAVE:DEFAULT
/INTERLEAVE:NONE
Designates the method of interleaving the memory mod-
ules; supersedes the console program’s default interleav-
ing.
SET TERMINAL
/BREAK
/NOBREAK
/HARDCOPY
/NOHARDCOPY
/SCOPE
/NOSCOPE
/SPEED:n
Sets console terminal characteristics.
SHOW ALL Displays the current value of parameters set.
SHOW BOOT Displays all boot commands and nicknames that have been
saved using SET BOOT.
SHOW CONFIGURATION Displays the hardware device type and revision level for
each XMI and VAXBI node and indicates self-test sta-
tus.
SHOW CPU Identifies the primary processor and the status of other pro-
cessors.
1
Vector processors are supported only on Model 400 and 500 systems.
G–2 VAX 6000 Series Owner’s Manual