Owner`s manual

Appendix G
Console Commands
Table G–1 gives a summary of the console commands. Chapter 5 gives a
full description of each command, its qualifiers, and examples.
Table G–1: Console Commands and Qualifiers
Command and
Qualifiers Function
BOOT
/R3:n /R5:n
/XMI:n /BI:m
/NODE:n
/FILENAME:xyz
/DSSI_NODE:n
/PORT:x
Initializes the system, causing a self-test, and be-
gins the boot program.
CLEAR EXCEPTION Cleans up error state in XBER, XBEER, and CPU-
specific registers.
CONTINUE Begins processing at the address where processing was in-
terrupted by a CTRL/P console command.
DEPOSIT
/B /G /I /L /M
/N /P /Q /V
/VE /W
Stores data in a specified address.
EXAMINE
/B /G /I /L /M
/N /P /Q /V
/VE /W
Displays the contents of a specified address.
FIND
/MEMORY
/RPB
Searches main memory for a page-aligned 256-Kbyte block
of good memory or for a restart parameter block.
HALT Null command; no action is taken since the pro-
cessor has already halted in order to enter con-
sole mode.
HELP Prints explanation of console commands.
Console Commands G–1