Owner`s manual

E.2 Updating EEPROM Contents
Example E–1 shows a sample EEPROM update of a Model 600 two-
processor system. The boot processor is in slot 1 of the XMI card cage
and the secondary processor is in slot 2.
At the console prompt, boot VAX/DS.
At the VAX/DS prompt, load the EVUCA program.
Attach the boot processor.
Attach the secondary processor.
Issue SELECT ALL to select all devices in the system configuration.
SET TRACE enables printing of test numbers and names when EVUCA
runs.
Issue the START command to begin the EVUCA program.
In this example the EXUCA.BIN data file is loaded to update KA66A
processors. The EVUCA program uses the data file that corresponds to
the processor type (see Table E–1). Press Return to continue.
The EEPROM updates are verified.
Exit VAX/DS.
E–2 VAX 6000 Series Owner’s Manual