Owner`s manual

Appendix E
EVUCA Program
This appendix describes the EVUCA program, the VAX 6000 EEPROM
update utility. EVUCA allows you to:
• Update a processor’s EEPROM contents
• Load boot primitives
E.1 EVUCA Program Overview
The EVUCA program runs under the VAX Diagnostic Supervisor (VAX/DS)
in console mode. Table E–1 lists the processor-specific data files used to
update the EEPROM contents. Each data file consists of the latest patch
file for each major version of the PROM and all loadable boot primitives.
EEPROMs are also updated on secondary processors if they are selected
and attached under VAX/DS.
Table E–1: EEPROM Update Data Files
Data File Processor Model Number
EXUCA.BIN KA66A 600
EMUCA.BIN KA65A 500
ERUCA.BIN KA64A 400
ELUCB.BIN KA62B 300
ELUCA.BIN KA62A 200
The following conditions must be met before running EVUCA:
• All processors and memory modules must pass self-test.
• Each processor must have console and diagnostic ROMs at the same
major revision level.
EVUCA Program E–1