Owner`s manual

5.19 SHOW
The SHOW command displays the current value of
parameters specified in a SET command and other
configuration information about the system.
Examples
1.
>>> SHOW ALL
Type Rev ! Lists all system parameters,
1+ KA65A (8080) 0006 ! beginning with the system
9+ MS65A (4001) 0084 ! configuration.
D+ CIXCD (0C05) 1652
E+ DEMNA (0C03) 0601
Current Primary: 1 ! Shows the status of CPUs
/NOENABLED-
/NOVECTOR_ENABLED- ! Models 400 and 500 only
/NOPRIMARY-
! Shows the memory interleave
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
.....A1........ ILV
.....64........ 64Mb
/INTERLEAVE:DEFAULT
/SCOPE /SPEED: 1200 /BREAK ! Shows the terminal characteristics
English ! Shows the language mode
XMI:E 08-00-2B-08-3D-64 ! Shows the Ethernet address
DEFAULT /R5:00000010 /XMI:E DU0 ! Shows Boot specs saved
2.
>>> SHOW FIELD
Saved boot specifications:
DEFAULT /R5:00000010 /XMI:E DU0
Console terminal parameters:
/SCOPE /SPEED: 9600 /NOBREAK
Console error message language mode:
English
Memory configuration:
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
.....A1........ ILV
.....64........ 64Mb
/CONSOLE_LIMIT:00100000
/INTERLEAVE:DEFAULT
Power system: C
System serial number: SG01234567
5–56 VAX 6000 Series Owner’s Manual