Owner`s manual

Table 5–11: SET CPU Command Qualifiers’ Effect After a Sys-
tem Reset
Qualifier BPD Value at Next Reset
1
/NEX[T_PRIMARY] B for boot processor; must be chosen the boot proces-
sor at the next system reset. All other CPUs show as D.
/NOE[NABLED] D for disable; processor is not included in the configura-
tion.
/NOP[RIMARY] D for disable; can be only a secondary processor.
/P[RIMARY] B if selected as the boot processor; E if it is a secondary proces-
sor.
/NOV[ECTOR_ENABLED] D for disable; vector processor is not included in the configura-
tion.
None B for boot processor.
1
The key switch must be at Update when the SET CPU command is issued.
Console 5–49