Owner`s manual

Table 2–2 lists each module’s LED status indicating self-test passed or self-
test failed.
Table 2–2: Module LEDs After Self-Test
Module Self-Test Passed Self-Test Failed
Boot processor Yellow ON
Top two red ON
Yellow OFF
Some red ON
1
Vector processor(s) Yellow ON Yellow OFF
Secondary processor(s) Yellow ON
Top two and
bottom red ON
Yellow OFF
Some red ON
Error summary ON
Memory Yellow ON
Green ON
Yellow ON
2
Green ON
VAXBI adapter Yellow ON Yellow OFF
1
Processor modules have eight red LEDs. The group of seven is used to display the num-
ber of the test that failed. The eighth, the error summary, illuminates if any test failure re-
sults in any hardware error bits being set. Refer to the VAX 6000 Model 500 Service Man-
ual for more information.
2
The yellow indicator on the memory module is used to indicate only that self-test has com-
pleted.
2–6 VAX 6000 Model 500 Mini-Reference