Owner`s manual

Example 2–3 shows a sample self-test display when a vector processor is
included in the system configuration.
Example 2–3: Sample Self-Test Results with Vector Processor
#123456789 0123456789 0123456789 0123456789 0123456789 #
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
A.A.MM..MV--PMV--P TYP
+.+.++..++++++ STF
.........EE.EB BPD
.........++.++ ETF
.........EE.EB BPD
. . . . A4 A3 . . A2 . . A1 . . ILV
. . . . 32 32 . . 32 . . 32 . . 128 Mb
Console = V1.00 RBDs = V1.00 EEPROM = 1.00/1.00 SN = SG01234567
>>>
At power-up, the system performs self-test and displays the results the
same as it does with scalar processors only.
The TYP line in Example 2–3 indicates that vector processors (V) are
in slots 2 and 5. The dashed lines indicate that they are attached to
the scalar processors to their right.
Self-Test 2–5