Owner`s manual

?0101 BVP port error—aborting
7. * Passing control to transfer address
CI Status and Error Boot Messages
1. [Start boot]
?0046 Specified node is not an I/O adapter
?0109 Illegal adapter specified for CI boot
2. * Initializing adapter
?0119 Failure to initialize specified adapter
3. * Specified adapter initialized successfully
4. * Connecting to storage controller
5. * Previous operation failed—retrying CI boot
6. * Port received a "no path" error—retrying the init sequence
?0110 Port received a "no path" error after 6 retries—aborting the
boot process
7. * Connecting to MSCP server layer
8. * Previous operation failed—retrying CI boot
9. * Connecting to boot disk
10. * Connecting to shadow unit
?0117 Specified unit offline
?0118 Specified unit offline—Unit unknown, online to another
controller or port disabled via A,B switches
?010E Specified unit offline—No media mounted or disabled via
RUN/STOP switch setting
?0116 Specified unit is inoperative
?0103 Drive error detected—aborting
?0102 Controller error detected—aborting
?0114 Serious exception reported—aborting
11. * Failure to connect to shadow unit—retrying on physical unit
12. * Reading bootblock from disk
?0117 Specified unit offline
?0118 Specified unit offline—Unit unknown, online to another
controller or port disabled via A,B switches
?010E Specified unit offline—No media mounted or disabled via
RUN/STOP switch setting
1–24 VAX 6000 Model 500 Mini-Reference