Owner`s manual

Table 1–12 (Cont.): Standard Console Error Messages
Error Message Meaning
?0063 Unable to locate console tape de-
vice.
The console could not locate the I/O
adapter that controls the TK tape.
?0064 Operation only applies to secondary
processors.
The command can only be directed at a
secondary processor.
?0065 Operation not allowed from secondary
processor.
A secondary processor cannot perform this
operation.
?0066 Validation of EEPROM tape image failed. The image on tape is corrupted or
is not the result of a SAVE EEP-
ROM command. The image cannot be re-
stored.
?0067 Read of EEPROM image from tape failed. The EEPROM image was not success-
fully read from tape.
?0068 Validation of local EEPROM failed. For a PATCH EEPROM operation, the
EEPROM must first contain a valid im-
age before it can be patched. For a RE-
STORE EEPROM operation, the im-
age was written back to EEPROM
but could not be read back success-
fully.
?0069 EEPROM not changed. The EEPROM contents were not changed.
?006A EEPROM changed successfully. The EEPROM contents were success-
fully patched or restored.
?006B Error changing EEPROM. An error occurred in writing to the EEP-
ROM. The EEPROM contents may be cor-
rupted.
?006C EEPROM saved to tape successfully. The EEPROM contents were success-
fully written to the TK tape.
?006D EEPROM not saved to tape. The EEPROM contents were not com-
pletely written to the TK tape.
?006E EEPROM Revision = x.xx/y.yy. The EEPROM contents are at revi-
sion x.xx with revision y.yy patches.
?006F Major revision mismatch between tape
image and EEPROM.
The major revision of tape and EEP-
ROM do not match. The requested opera-
tion cannot be performed.
?0070 Tape image Revision = x.xx/y.yy. The EEPROM image on the TK tape is
at revision x.xx with revision y.yy patches.
1–18 VAX 6000 Model 500 Mini-Reference