Owner`s manual

Table 1–5 (Cont.): Console Commands and Qualifiers
Command and
Qualifiers Function
Z
/BI:n
Logically connects the console terminal to another proces-
sor on the XMI bus or to a VAXBI node.
! Introduces a comment.
Table 1–6: Console Control Characters
Character Function
BREAK
Increments the console baud rate if enabled.
CTRL/C
Causes the console to abort processing of a command.
CTRL/O
Causes console to discard output to the console terminal until the next
CTRL/O
is entered.
CTRL/P
In console mode, acts like
CTRL/C
. In program mode, causes the boot proces-
sor to halt and begin running the console program.
CTRL/Q
Resumes console output that was suspended with
CTRL/S
.
CTRL/R
Redisplays the current line.
CTRL/S
Suspends console output on the console terminal until
CTRL/Q
is typed.
CTRL/U
Discards all characters on the current line.
DELETE
Deletes the previously typed character.
ESC
Suppresses any special meaning associated with a given character.
RETURN
Carriage return; ends a command line.
Console Operation 1–7