Owner`s manual

Table 1–5 (Cont.): Console Commands and Qualifiers
Command and
Qualifiers Function
SET TERMINAL
/BREAK
/NOBREAK
/HARDCOPY
/NOHARDCOPY
/SCOPE
/NOSCOPE
/SPEED:n
Sets console terminal characteristics.
SHOW ALL Displays the current value of parameters set.
SHOW BOOT Displays all boot commands and nicknames that have been
saved using SET BOOT.
SHOW CONFIGURATION Displays the hardware device type and revision level for
each XMI and VAXBI node and indicates self-test sta-
tus.
SHOW CPU Identifies the primary processor and the status of other pro-
cessors.
SHOW ETHERNET Locates all Ethernet adapters on the system and dis-
plays their addresses.
SHOW FIELD Displays saved boot commands, console terminal pa-
rameters, console language mode, memory configura-
tion, type of power system, and system serial num-
ber.
SHOW LANGUAGE Displays the mode currently set for console error mes-
sages, international or English.
SHOW MEMORY Displays the memory lines from the system self-test, show-
ing interleave and memory size.
SHOW TERMINAL Displays the baud rate and terminal characteristics func-
tioning on the console terminal.
START Begins execution of an instruction at the address speci-
fied in the command string.
STOP
/BI:n
Halts the specified node.
TEST
/RBD
Passes control to the self-test diagnostics.
UPDATE Copies contents of the EEPROM on the processor exe-
cuting the command to the EEPROM of another proces-
sor.
1–6 VAX 6000 Model 500 Mini-Reference