Owner`s manual

Table 1–5 (Cont.): Console Commands and Qualifiers
Command and
Qualifiers Function
EXAMINE
/B /G /I /L /M
/N /P /Q /V
/VE /W
Displays the contents of a specified address.
FIND
/MEMORY
/RPB
Searches main memory for a page-aligned 256-Kbyte block
of good memory or for a restart parameter block.
HALT Null command; no action is taken since the pro-
cessor has already halted in order to enter con-
sole mode.
HELP Prints explanation of console commands.
INITIALIZE [n]
/BI:n
Performs a system reset, including self-test.
REPEAT Executes the command passed as its argument.
SET BOOT Stores a boot command by a nickname.
SET CPU [n]
/ENABLED
/ALL
/NOENABLED
/NEXT_PRIMARY
/PRIMARY
/ALL
/NOPRIMARY
/VECTOR_ENABLED
/NOVECTOR_ENABLED
Specifies eligibility of processors to become the boot pro-
cessor or disables a vector processor.
SET LANGUAGE
ENGLISH
INTERNATIONAL
Changes the output of the console error messages between
numeric code only (international mode) and code plus expla-
nation (English mode).
SET MEMORY
/CONSOLE_LIMIT:n
/INTERLEAVE:(n+n...)
/INTERLEAVE:DEFAULT
/INTERLEAVE:NONE
Designates the method of interleaving the memory mod-
ules; supersedes the console program’s default interleav-
ing.
Console Operation 1–5