Technical data

3. Connect the ThinWire cable to the T-connector as shown in Figure 25.
Figure 25: Making a ThinWire Ethernet Connection at the DESQA
Module
Feed Cable Under System
and Through Opening
MLO-004024
ThinWire Ethernet
Connector
T-Connector
• If your system requires one connection to the network:
a. Connect the ThinWire cable to the upper end of the T-connector.
b. Connect a terminator to the other end of the T-connector.
Push in and turn the connector or terminator clockwise until it locks
in place.
• If your system is a link in a network and connects to two additional
components:
a. Connect a ThinWire cable to one end of the T-connector.
b. Connect a second ThinWire cable to the other end of the T-
connector.
Push in and turn the connectors clockwise until they lock in place.
40 VAX 4000 Model 300 Installation