Technical data

2. Make sure the sliding lock on the standard Ethernet connector on the
console module (Figure 22) is in the up position. Then feed the plug
end of the cable under the system from the back or side and insert it
into the connector. Slide the lock down to secure the connection.
Figure 22: Making a Standard Ethernet Connection at the Console
Module
Feed Cable Under System
and Through Opening
MLO-004022
Ethernet
Connector
Switch
Standard
Ethernet
Connector
Sliding Lock
3. Connect the other end of the cable to one of the following devices.
• An H4000 or H4005 transceiver on a traditional baseband Ethernet
cable
• A DELNI interconnect, which can in turn be connected to a
baseband Ethernet cable, and which can connect up to eight systems
in a local area network
• A DESTA adapter, which lets you connect the Ethernet transceiver
cable to ThinWire cabling
36 VAX 4000 Model 300 Installation