Technical data

• If your system is a link in a network and connects to two additional
components:
a. Connect a ThinWire cable to one end of the T-connector.
b. Remove the terminator from the other end and connect a second
ThinWire cable to it.
Push in and turn the connectors clockwise until they lock in place.
5. Connect the ThinWire cable to one of the following devices.
• A ThinWire Ethernet Multiport Repeater (DEMPR), which can in
turn be connected to a baseband Ethernet cable, and which can
connect up to eight ThinWire segments in a local area network
• A ThinWire Ethernet Singleport Repeater (DESPR), which can in
turn be connected to a baseband Ethernet cable, and connects to
one ThinWire segment
• A ThinWire Ethernet adapter in another system or workstation
NOTE: Contact your network manager or Digital service representative if
you have questions about network configurations.
7.6.2 Making a Standard Network Connection at the Console Module
To make a standard network connection at the console module:
1. Find the Ethernet transceiver cable. It has a right-angle plug at one
end and a socket at the other end.
VAX 4000 Model 300 Installation 35