Technical data

8 Connect an Expander, If Required . . . . . . . . . . . . . . . . . . . . . 45
8.1 Connecting the Q-bus Cables . . . . . . . . . . . . . . . . . . . . . . . 48
8.2 Connecting the DSSI Cable . . . . . . . . . . . . . . . . . . . . . . . . 49
8.3 Connecting the KZQSA External Cable . . . . . . . . . . . . . . . 50
8.4 Connecting the Power Control Bus Cable . . . . . . . . . . . . . 53
8.5 Connecting the Ground Cable . . . . . . . . . . . . . . . . . . . . . . 54
9 Connect the KZQSA Internal Cable, If Required . . . . . . . . . . 54
10 Connect the DSSI Cable Dual Host Only . . . . . . . . . . . . . . 58
11 Connect the Ground Cable Dual Host Only . . . . . . . . . . . . 61
12 Connect the System Power Cable . . . . . . . . . . . . . . . . . . . . . . 62
13 Turn On the System and Select a Language . . . . . . . . . . . . . 64
14 Close the System Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
15 After Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Appendix A Starting and Modifying VMS Factory-Installed
Software
A.1 Pre-Startup Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . A–1
A.2 Startup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–2
A.2.1 Modifying FIS for a Standalone System . . . . . . . . . . . . . . . A–3
A.2.2 Modifying FIS for a Simple VAXcluster Network . . . . . . . . A–7
A.2.3 Modifying FIS for a Complex Network or Dual-Host
System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–11
A.2.3.1 Configuring for Dual-Host Systems . . . . . . . . . . . . . . . . A–12
A.2.3.2 Checking Your Modification Work . . . . . . . . . . . . . . . . . A–12
Index
Figures
1 Shipping Carton Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Sliding the System into Position . . . . . . . . . . . . . . . . . . . . . . 4
3 Lock and Key Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Opening the System Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Connecting a VT300-Series or VT400-Series Console Terminal 8
6 System Controls and Indicators Power Switch . . . . . . . . . 9
iv