User Manual

Getting to know your machine Getting started
Assembling your upright slim vacuum cleaner
Line up the connector on
the reach wand with the
Powered Head. Push the
reach wand down onto
the Powered Head until it
clicks into place.
Push the handheld down
onto the reach wand until
it clicks into place.
The vacuum is not free
standing and in between
uses must always be placed
in the wall bracket, or laid
at on the oor in a suitable
location, so it does not
become a trip hazard or
can be stepped on.
PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE
Model Number VX63
Name Vax Cordless Blade Pet Pro
Battery voltage 28.8V
Run time Up to 45 minutes*
Charge time 4 hours
Weight 3.0 kg
Dust bin capacity 0.3L
Technical Specication
Subject to technical change without notice.
Turn o brushbar on hard oors. Images are illustrative only.
To purchase consumables and accessories, please visit vax.com.au
*Brushbar and Boost o
Before you begin
CAUTION: Always switch o the vacuum cleaner before connecting or disconnecting the handheld/attachments
or removing and emptying the dirt container.
For best cleaning results, lters require cleaning at least every 3 months and should be replaced every 12 months
depending upon use.
Lithium-Ion battery safety features
• Over charge protection • Over load protection
• Short circuit protection • High/low temp protection
• Deep discharge protection
CAUTION: This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance
always lie at on the oor in a suitable location so it does not become a trip hazard or can be stepped on.
Battery level indicator
Dirt container lid
Dirt container release button
Reach wand
Powered Head/
accessory release clip
Powered Head
Brushbar
Dirt container
Handheld release button
On/O button
Handle
Boost mode on/o button
Brushbar on/o button
Charging port
Filter cap
Battery level gauge
Battery level indicator
Charger SpecicationBattery Specication
Accessories & Consumables
Charger model no. ZD24W342060
Input 100-240V ~ 50/60Hz 0.8A Max
Output 34.2V
600mA
Use with Li-ion Battery 32BTBT3V1 ONLY
Type Lithium-ion rechargeable battery pack
Battery model no. 32BTBT3V1
Voltage 28.8V
Rating 2.0Ah 57.6Wh
Use with E-TEK model ZD24W342060
Charger ONLY
Powerhead Specication
Model no. FT3V1B1
Wattage 48W
Voltage 28.8V
Powerhead to be used ONLY
with Vax VX63
Filter pack Model No. VX63F