User guide

Looking After Your Machine
12
vax.com.au
vax.co.nz
Remove the rubber ring. Push both buttons to open
the turbo tool.
Removing blockages from the TurboTool
Using a pair of scissors, cut any hair or
debris free from around the brushes.
Changing the belt
Switch o and unplug your
vacuum cleaner. Recline
the vacuum and lie it on its
front, remove 5 screws to
release brushbar cover.
Lift the brushbar out of the
 oor head and remove the
drive belt.
Remove the brushbar cover
and push the  oor head
into reclined position.
Remove the drive belt and
any debris from the spindle.
Loop new drive belt around
the spindle  rst and then
onto the brushbar. Insert the
brushbar back into  oor
head and replace the
brushbar cover, insert 5
screws to secure.