CORDLESS SlimVac CORDLESS SLIMVAC WITH DETACHABLE HANDHELD LET’S GET STARTED.
Let’s talk safety This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. READ ALL THE INSTRUCTIONS BEFORE USING THIS APPLIANCE Basic safety precautions • It is a battery-operated appliance, the battery being charged whilst inside the appliance. • Only use the vacuum cleaner indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing from moving parts and openings whilst using the vacuum cleaner.
or run ter or n the ich if • Only Vax recommended tools and accessories should be used with this vacuum cleaner • This vacuum cleaner does not stay upright without constant support, in between uses lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on. • Keep the charger and batteries in a dry place, and use them indoors only. • Do not use charger with damaged cord or plug.
Thank you for buying this Cordless SlimVac. Taking care of your carpets and hard floors The Cordless SlimVac series is designed to make vacuuming carpets and hard floors regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets and hard floors will ensure they keep their appearance for longer and Vax will help you take good care of them.
Contents Let’s talk safety Cordless SlimVac Getting to know your machine Included with your machine Getting started 3-in-1 Tool Using your machine Taking care of your machine Let’s talk technical Accessories Notes What to do if it goes wrong Getting in touch Model comes with a charger, battery, wall mount, 2 wall plugs, 2 screws and user guide. Contents vary dependant on model purchased.
Getting to know your machine Brushbar On/Off button On/Off and charging light Handheld release button Filter cover release buttons Handle On/Off trigger Battery charger inlet Continuous power latch (hidden) Battery release button Dirt container release button (hidden) Reach wand Battery Dirt container Dirt release button Power head/accessory release clip Powered Head Brushbar Technical Specification Battery Specification Charger Specification Name Cordless SlimVac Type Lithium-ion rechargeable b
Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin CAUTION: Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments or removing and emptying the dirt container. IMPORTANT: The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, remove the battery.
Getting started Fixing the wall bracket Fully assemble the vacuum but do not attach the battery. Attach the wall bracket to the handle. Use both screws and wall plugs to secure the wall bracket to the wall. Place covers over the screws. Firmly press the vacuum handle into the wall bracket to secure. With the wall bracket attached, stand the vacuum close to the wall, in the upright position with the Powered Head flat on the floor. Holding the wall bracket firmly in place, carefully remove the vacuum.
Getting started PLEASE READ ‘LET’S TALK SAFETY’ BEFORE USE CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble or heat above manufacturer’s maximum temperature limit (60° C/140°F) or incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in a fire.
Getting started Charging the battery CAUTION: Do not use the vacuum cleaner when the machine is plugged in and charging. CAUTION: For best performance the terminals on the battery and vacuum cleaner must be clean and free from dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner. The On/Off and charging light will illuminate continuously whilst the charger is connected. Red light flashing – The battery is charging.
Using your machine CAUTION: This vacuum cleaner has a constantly rotating brushbar when the brushbar ‘ON’ is selected. Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the floor surface. The brushbar should be ON for carpets and OFF for hard floors. Using as a slim vacuum cleaner Squeeze the trigger located underneath the handle, the machine will switch ‘On’.
Using your machine Using as a handheld vacuum cleaner Always take extra care when using the vacuum cleaner on the stairs. Press the handheld release clip. Pull to separate the handheld from the reach wand. The reach wand when attached to the Powered Head/accessory is not free standing, place safely and securely to one side. Choose an accessory (pictures illustrated dependent upon model). Squeeze the trigger located underneath the handle, the machine will switch ‘On’.
Using your machine Using as a reach slim vacuum cleaner The reach wand can be used for hard to reach places. Press the Power Head/ accessory release clip and pull to remove the Powered Head from the reach wand. Choose an accessory (pictures illustrated dependent upon model). Push the chosen accessory into the reach wand until it clicks into place. Squeeze the trigger and push the ‘Continuous power latch’ towards the trigger.
Taking care of your machine Removing the battery CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. Lie the handheld on its side on a flat stable surface. Press the battery release button. Slide the battery out from the back of the handheld. Emptying the dirt container WARNING: Don’t over fill the dirt container to avoid blocking the air flow through the vacuum cleaner. Do not exceed the max line indicated on the dust container.
Taking care of your machine Cleaning the post-motor filter CAUTION: Always remove the battery from the vacuum cleaner before performing maintenance or troubleshooting checks. For continuous best performance the filter requires cleaning every 3 months and should be replaced every 6 months depending upon use. Do not use your vacuum cleaner without the filters in place. 24hr Press the filter cover release buttons located on both sides of the filter cover and pull to remove the filter from the machine.
Taking care of your machine Cleaning the filter and separator Tap the mesh filter and separator over a bin to remove any dirt/ debris. Using a dry cloth wipe away any remaining dirt/debris. Refitting the separator, filter and dirt container CAUTION: Incorrect fitting of the separator and filter will reduce suction. Line up the arrows around the side of the separator with the arrows on the handheld. Twist the separator clockwise locking it into place.
Let’s talk technical IMPORTANT: If the brushbar has been obstructed, the Motor Protection Sensor may have been activated and the brushbar will seize. Remove battery pack, then remove the Powered Head from the machine and clear any obstruction. Refit the Power head, the battery and the switch on the vacuum cleaner by pressing the trigger and press the brushbar on/off button. Removing and replacing the brushbar Slide to release the brushbar. The cover can not be removed.
Accessories Also available SlimVac Tools Visit www.vax.com.au Refer to ‘using your machine’ section for tool assembly instructions. Reach mode tools 3-in-1 Tool The multi functional 3 in 1 tool is ideal for use all around the home without having to switch between tools. It’s perfect for those tricky corners and crevices, great for upholsteries such as; curtains and sofas, along with dusting furniture and hard surfaces.
Notes
Notes
Notes
What to do if it goes wrong Problem Is there an accessory missing? Why does the vacuum cleaner have no power? Why isn’t the light on the vacuum cleaner lit when the battery is charging? Why won’t the vacuum cleaner pick up? Why won’t the brushbar turn? Why is dust escaping from the vacuum? Solution • Check the contents panel on the box to make sure the part is included with your vacuum cleaner. • Check the battery is inserted correctly into the vacuum cleaner.
Getting in touch * Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
Distributed by Techtronic Industries Australia Pty. Ltd. 31 Gilby Road, Mt Waverley, VIC 3149 Australia. Careline AU: 1300 361 505 www.vax.com.au Careline NZ: 0800 800 900 www.vax.co.
