User Manual

Using your machine Using your machine
To produce steam squeeze
the trigger. To prevent overly
wetting the carpet, avoid
holding the trigger
continuously
Move the steam mop slowly
backwards and forwards
across the carpet paying
particular attention to high
trac areas*
To release the carpet
glider, place foot on clip
and push down. Lift
steam mop to unhook
and remove
Refreshing carpets
To recline the steam mop
place foot on oor head and
pull handle backwards
Place foot on outer
oor head and gently pull
away steam mop to release
the compact scrub brush
Move steam mop back and
forwards across the oor,
getting into corners and
awkward places
Using accessories
IMPORTANT: When using on carpets, always make sure the velcro microbre cleaning pad is used and covers the oor head
entirely before using the carpet glider. Only use the carpet glider when refreshing carpets and turn the detergent dial to OFF.
Turn the detergent dial to OFF
when refreshing carpets
Place the microbre pad on
the oor white side facing
up. Place steam mop onto
pad making sure the entire
pad covers the oor head
With microbre pad attached,
hook the steam mop into the
front of the carpet glider and
push to clip into place. Carpet
glider should only be used
when refreshing carpets
Push On/O button
to switch on
IMPORTANT: Always switch o the steam mop before attaching or removing the oor head.
* IMPORTANT:
Never leave the steam
mop in one spot on any surface for
an extended period of time as this may
damage the oor surface.