Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 1 Vax Careline: 0870 6061248 www.vax.co.uk VX1 BAGLESS UPRIGHT VACUUM CLEANER Vax Model Number: VX1 Instruction Manual Please read carefully before using the cleaner. Always fully extend the mains cable before use.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 2 Parts Overview Parts Overview 1. Diagram FRONT 1 24 BACK 25 2 3 13 14 26 15 14 15 4 5 6 17 16 Fig.1/2 7 18 19 6 7 6 5 20 8 27 21 9 10 22 11 12 28 23 Fig.1/1 Fig.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 4 Safety Information/Use & Function 2. Safety Information Use & Function/How to Operate 19. Turn off the switch before unplugging. 20. Use only CE-approved 13 amp extension cords. FOR HOUSEHOLD USE ONLY. Non-approved extension cords may overheat. When using the vacuum cleaner, basic safety precautions Care should be taken to arrange the cord so that should always be observed, including the following: the cord cannot be pulled or tripped over. 1. 2. 3. 4. 5.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 6 Accessories/Dirt Container & Filter: Removal & Replacement How to Operate/Accessories NOTE: For passing over obstacles or vacuuming on thick carpets, place the cleaner in its vertical parked position and pass the cleaner over the obstacle by tilting the cleaner. 4. If vacuuming needs to be paused briefly bring the vacuum cleaner into its vertical locking position. The brushbar switches off automatically to prevent any damage to the carpet (Fig.4/4).
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 8 Dirt Container & Filter: Removal & Replacement 2. Unlock and remove the dirt container by pushing the carry handle down and away from the machine (Fig.6/2). Fig.6/2 3. Tapping the container several times will help to loosen any dirt that may have become attached to the filter (Fig.6/3). Dirt Container & Filter: Removal & Replacement/Rotating Brushbar: Removal & Replacement 6.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 10 Rotating Brushbar: Removal & Replacement/Maintenance 2. There is an automatic system which cuts off the power supply if the brushbar gets clogged up. After cleaning the brushes, wait for 2 minutes then plug the vacuum cleaner into the wall outlet and press the reset button (Fig.7/2) before pressing the power on/off switch. Maintenance 4. Replace the channel cover before attaching the hose collar by turning it in an anti-clockwise direction (Fig.8/4). 4.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 12 Troubleshooting UK Service & Help/Technical Specification 8. Troubleshooting 9. UK Service & Help WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG VACUUM CLEANER BEFORE SERVICING Vax Care 0870 6061248 PROBLEM: Cleaner won’t run Cause: Not properly plugged into wall outlet. Solution: Plug in firmly. Cause: No electricity in wall outlet. Solution: Check fuse or breaker. Cause: On/off switch not turned on. Solution: Push on/off switch to on.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 14 This page has been intentionally left blank. 14 This page has been intentionally left blank.
Vax VX1 V2 D1 JN.qxd 5/17/05 4:24 PM Page 16 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the declare that the product VX1 is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
