Designed in the UK White User Guide VWC vax.com.au Performance is everything.
Contents 1 Contents 1 Machine Overview 2 General Safety Information 3 Getting Started 5 Looking After Your Machine — Filters 6 FAQs 8 Other Information 9
Machine Overview 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Dirt container handle Dirt container lid Power on/off button Main body Dirt container Hose connector Base Cord rewind button (hidden) Dirt container release button Variable power dial Wheel outer Wheel inner Inner separator Outer cyclone Dirt container release latch Upholstery tool Crevice tool Dusting brush Hose Telescopic wand Combination floor tool Tool Caddy 1 2 3 4 5 6 7 9 8 10 14 11 15 12 16 19 13 21 17 20 18 22
General Safety Information This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. Please keep instructions for further use. When using the vacuum cleaner basic safety precautions should always be observed, including the following: 1. Only use the vacuum cleaner indoors on dry surfaces. 2. Turn off the on/off switch on the vacuum cleaner controls before disconnecting or connecting from the mains supply. 3.
General Safety Information WARNING: Always switch off and unplug the vacuum cleaner from the electrical socket before assembling, opening or emptying the dirt container, or before connecting/disconnecting the attachments. CAUTION: The vacuum cleaner is a very powerful unit. Before plugging the cord into the electrical socket, make sure the switch is in the ‘off’ position.
Getting Started PLEASE READ SAFETY INFORMATION BEFORE USE (p3-4) Before plugging the cord into the electrical socket, make sure the switch is in the ‘off’ position. Assembling your cylinder Insert the end of the hose into the unit. Ensure the hose has clicked into place. How to use Slot the metal telescopic extension tube and hose handle together. All accessories can be fitted to the end of the metal telescopic extension tube and hose handle. Fully unwind the power cord.
Looking After Your Machine – Filters IMPORTANT: If the air inlet, hose or telescopic tube is blocked, switch off the vacuum cleaner and remove the blockage(s) before re-starting the vacuum cleaner. IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the electrical socket and turn off the switch. Remove and empty the dirt container.
Looking After Your Machine – Filters Cleaning the shroud 1 Hold the dirt container and twist the lid anti-clockwise. 4 2 Lift the lid to reveal the pre-motor filter. 5 3 Lift out the pre-motor filter. 6 TAP Remove the inner separator from the container. Remove the cap from the inner separator. Dislodge any excess dirt by gently tapping the inner separator upside down above a bin. Cleaning the HEPA media post-motor filter 1 2 3 P TA Post motor filter is located in the right side wheel.
FAQs Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks. Is there an accessory missing? • Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is definitely included in your unit. • If it is missing, we’re here to help.
Other Information Vax Service & Help Vax Careline: Australia New Zealand 1300 361 505 0800 800 900 Monday-Friday 8.30am to 5.00pm If you have queries or concerns about using your Vax, call the Vax Careline. Calls are charged at the standard local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling. For the nearest Service Agent, please call the Vax Customer Careline or visit vax.com.
Notes vax.com.
Distributed by Techtronic Industries Australia Pty. Ltd. Level 1, 660 Doncaster Road, Doncaster, Australia 3108. www.vax.com.au Service Line: AU: 1300 361 505 / NZ: 0800 800 900 vax.com.au Performance is everything.
