User guide
FAQs
11
vax.co.uk
WARNING: to reduce the risk of personal injury, unplug the carpet washer before performing
maintenance/troubleshooting checks.
Why won’t the cleaner run?
• It may not be plugged into the electrical
socket correctly; ensure that the plug is pushed
in securely.
• The electrical socket may not be working
properly; check the fuse or breaker, or consult
an electrician.
• The on/off switch may not be turned on.
Push on/off switch to “on”.
•
There may be a blown fuse or tripper breaker.
Reset the circuit breaker or replace fuse.
Why won’t the cleaner pick up?
• The dirty water tank may be full. Switch off and
unplug cleaner. Empty dirty water tank as shown
on page 8.
• The dirty water tank is not installed correctly.
Refer to page 9 for fitting information.
• There may be an obstruction in the hose/wash
tool. Remove hose and clear obstruction.
• The brushbar is worn. Replace the brushbar.
See page 10.
Why is dust escaping from the cleaner?
• The dirty water tank may be full. Switch off and
unplug cleaner. Empty dirty water tank as shown
on page 8.
• The dirty water tank is not installed correctly.
Refer to page 9 for fitting information.
• The solution tank may not be installed correctly.
Make sure the tank is locked securely in place.
Why won’t the clean water/solution dispense?
• The clean water tank may not be installed
correctly. Make sure the tank is locked securely
in place.
• The clean water tank is empty. Refill tank.
Refer to page 6 for instructions.
we’re here if you need us
(UK) 0844 412 8455 (ROI) 1-800 928 308
vax.co.uk/support • vaxireland.ie
or call:
Instead of taking me back to the shop, simply visit;
This does not aect your statutory rights.