User guide

Vax Service line: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au7
Maintenance
(Keep your Vax as good as new)
IMPORTANT: Your Vax vacuum cleaner is tted with high performance lters it is essential that these are
well maintained and cleaned according to the following instructions.
Maintaining the Filters
NOTE: Do not use any detergents or boiling
water to wash the lters.
Vax recommends that the pre-motor and post-motor lter should be checked and cleaned periodically depending
on the frequency of use and the volume of dirt being picked upon each occasion.
NOTE: Both Pre- and Post-Motor Filters can be rinsed in warm water (max 40°C). Allow to air dry for 24 hours
before replacing. Do NOT use any detergents or boiling water to wash the lters.
Once completely dry, return the lters and case to the vacuum cleaner. Replace all lters covers before restarting
the vacuum cleaner.
IMPORTANT: Even with regular cleaning, lters have a limited lifespan and will eventually need to be
replaced during the lifetime of the vacuum cleaner. If the performance of your vacuum cleaner is
compromised and/or the lters are severely discoloured, the lters may need to be replaced. As a general
guide, Vax recommends lters are replaced every 3-6 months depending on the level of use to ensure
optimum performance of your vacuum cleaner.
Cleaning the Pre-Motor Filter