User guide

Vax Service line: AU: 1300 361 505
NZ: 0800 800 900
vax.com.au5
Operation
Transporting
Mode Selector Dial
On/O Switch
To move your cleaner from
room to room, put handle
in upright position, tilt
cleaner back on rear
wheels and push forward.
The Mode selector dial
(A) turns the brushes on
and o.
The cleaner may also be
lifted using the carrying
handle (A) on the front of
the cleaner.
Push switch (A) once to
turn cleaner ON. Push
switch again to turn
cleaner OFF.
For dry debris pickup, turn the dial to the DRY VAC
position. In this position, the brushes will not rotate and
are raised o the oor surface.
To wet clean with brushes turned ON, turn the dial to
the WASH position. For wet pickup, turn the dial to the
WET PICKUP position.
Your FloorMate cleaner can be used to both vacuum dry debris and wet clean non-carpeted oor surfaces such
as vinyl, tile and sealed wood. It is not intended for use on carpet or rugs.
CAUTION: To prevent damage to wood oors, follow the ooring manufacturer’s
cleaning recommendations.
NOTE: If using cleaner on sealed wood oors, inspect oor surface for worn nish, bare wood or separated joints.
Do not use the cleaner to wet clean sealed wood oors if any of these conditions exist.
FIG. 3/9
FIG. 4/1
FIG. 3/10
FIG. 4/2
FIG. 3/8