User guide

7
V
ax Careline 0870 606 1248
dirt container & filter / clearing blockages
The post-motor filter can be rinsed in warm water (max
40°C). Allow to air dry for at least 24 hours before
replacing (Fig.6/9).
Return the post-motor filter to the casing and re-fit to the
back of the vacuum cleaner.
7. Clearing Blockages
WARNING: To reduce the risk of electric shock,
the power cord must be disconnected before
performing maintenance or troubleshooting checks.
Turn the vacuum cleaner off and unplug from the electrical
outlet.
The flexible hose can be disconnected from the vacuum
cleaner by pressing the release latch and then pull away
from the machine. Remove any blockages found then re-
connect the hose securely.
Removing debris from the TurboTool
(Model: VEC-21 only)
Switch the vacuum cleaner off and disconnect the power
plug from the electrical outlet.
Rotate the locking ring 180º (Fig.7/1).
Lift the top cover off and remove any blockage (Fig.7/2).
To re-assemble, ensure that the tabs are engage. Pivot the
lower housing closed and rotate the locking ring 180º
(Fig.7/2).
LOCKING RING
Fig.7/1
TABS
Fig.7/2
Fig.6/8
Fig.6/9
!
24
Vax VEC-11&21 User Guide v3.qxd:VEC-11&21 User Guide 21/7/08 18:34 Page 7