User guide

2.5.4 Select Single Device Tests Option

The Select Single Device Tests option lets you run tests for a single device.

• A functional test is performed on the device circuits.

• An exerciser test ensures that the device works properly.

After you select this option, the diagnostics are prepared for testing. If this

is the ﬁrst option you selected, the diagnostics are loaded and conﬁgured.

Loading and conﬁguring takes several minutes. After conﬁguring is complete,

you are prompted to press

Return

After you press

Return

, a list of the devices in your system is displayed:

MAIN MENU Release nnn Version xx.xx

SELECT SINGLE DEVICE TEST

Select the device number to be tested. The functional tests

will be run followed by the exercisers for 4 minutes.

1 - CPUA - VAX 4000 CPU

2 - MEMA - VAX 4000 memory system

3 - PDIA - SHAC DSSI Subsystem

4 - SGCA - Second Generation Ethernet Controller

5 - PDIB Shac DSSI subsystem.

Type the number; then press the RETURN key,

or type 0 and press the RETURN key to return to the Main Menu. >

Running the Diagnostic Monitor 2–15