User guide

2.5.2 Display System Conﬁguration and Devices Option

The Display System Conﬁguration and Devices option identiﬁes devices

recognized by MDM.

After you select this option, the diagnostics are prepared for testing. If this

is the ﬁrst option you selected, the diagnostics are loaded and conﬁgured.

Loading and conﬁguring takes several minutes. After conﬁguring is complete,

you are prompted to press

Return

After you press

Return

, the conﬁguration is displayed. See Example 2–1.

Example 2–1 Typical Conﬁguration

MAIN MENU Release nnn Version xx.xx

SYSTEM CONFIGURATION AND DEVICES

CPUA ... VAX 4000 CPU

KA53 MC=01 FW=3.9

MEMA ... VAX 4000 memory system

64 Megabytes. 131072 Pages.

MS44-DC ... 64MB memory module

PDIA ... SHAC DSSI Subsystem

SHAC Ver. 3.6

RF73 ... Unit #0, Dssi Disk, Online

TF85 ... Unit #1, Dssi Tape, Online

RF73 ... Unit #11, Dssi Disk, Online

SGCA ... Second Generation Ethernet Controller

SGEC V4 08-00-2B-19-60-66

PDIB ... SHAC DSSI Subsystem

SHAC Ver. 3.6

Press the

Return

key to return to the previous menu.

Up to two lines of information are provided for each device:

• One line lists the name of the device and gives a brief description.

• A second line may indicate the revision level of the device.

The revision level can refer to hardware or microcode. For example, the KA5n

(n can = 2 or 3) CPU described above is at revision 3.9 for microcode (MC=01).

2–12 Running the Diagnostic Monitor