User guide

Step 8: Turning on the Console Terminal and System Unit
1. Turn on the console terminal. Wait until it completes its power-up test.
(See the terminal documentation for more information.)
2. Check the terminal settings. See the VAX 4000 Model 105A/106A Operator
Information manual for the list of correct settings.
3. Turn on the system unit by setting the on/off switch to the on (|) position.
Figure 1–8 Power Turn On
1
3
2
1
MLO-011873
On/Off Switch (the on position (|) is shown)
Installation Procedure 1–9