User guide

Maintenance

Remove the pre-motor  lter. Rinse under cold water. Leave to fully dry in natural sunlight.

Cleaning the foam pre-motor  lter

Filter replacement

To maintain optimum performance check  lters whenever you replace the dust bag. Replace the  lters if they

become damaged or discoloured.

Cleaning the combination ﬂ oor tool

To maintain optimum performance, regularly inspect and clean the combination ﬂ oor tool. To do this, place the

ﬂ oor tool in hard ﬂ oor mode and remove any hair or  bres from the bristles.

Checking castors and wheels

To help maintain the smooth movement of the machine, regularly check the front castors and rear wheels and

remove any hair or  bres.

24hrs

WARNING: Avoid direct heat sources as these will damage the  lter.

Max 40°

water.

Vax Service line: AU: 1300 361 505

NZ: 0800 800 900