User guide

5
V
ax Careline 0870 606 1248
accessories / dirt container
5. Accessories
The accessories can be attached directly to the handle by
removing the telescopic tube and pushing in the desired
accessory.
The accessories can also be attached to the telescopic
tube for extra reach. Remove the combination floor head
and push on the desired accessory.
Dusting brush: for delicate surfaces.
Upholstery tool: for carpets, upholstery, stairs, etc.
Crevice Tool: for crevices, corners and cracks, etc.
TurboBrush
(
Model: V-118CP only)
: for pet hair, stair and
larger carpeted areas (NOTE: not recommended for hard
floors).
Hard floor tool
(Model: V-118CP only): for hard floor,
parquet and laminate covering.
TurboTool
(Model: V-118PP only): for vacuuming up pet
hair, stair and upholstery cleaning (NOTE: Do not use the
TurboTool on suede and leather surfaces).
6. Dirt Container: Removal
and Replacement
IMPORTANT: Vax recommends cleaning the
filters every time the dirt container is emptied
for consistent cleaning performance of your machine.
WARNING: Always unplug the vacuum cleaner
from the electrical outlet before removing the
dirt container.
WARNING: Do NOT use the vacuum cleaner
without ALL of the filters and dirt container in
place.
NOTE: For best performance, replace filters annually.
Emptying the Dirt Container
NOTE: The dirt container must be emptied every time
the dirt reaches the max line.
After removing the flexible hose, press the dirt container-
locking button on the top of the machine (Fig.6/1)
Remove the dirt container and position over a rubbish bin.
Press the button located under the safety latch to empty
the dirt container (Fig.6/2)
When all the dirt has fallen the dirt container may be wiped
with a damp cloth to clean. Allow to air dry completely
before closing the dirt container bottom and replace back
in the unit until a click is heard.
Fig.6/1
Fig.6/2
!
!
!
Vax V-118(HP_PP) User Guide.qxd:V-118(HP_PP) User Guide 29/5/08 16:59 Page 5