Operator`s manual

Slide back the locking device on the socket to secure the connection.
Figure 2–37 shows a standard Ethernet network connection.
3. Connect the other end of the cable to one of the following devices:
• An H4000 transceiver located on a traditional baseband Ethernet
cable.
• A DELNI which, in turn, can be connected to a baseband Ether-
net cable, and can connect up to eight systems in a LAN.
Figure 2–36: Ethernet Transceiver Cable
MLO-007143
The Digital Network and Communications publications explain the types
of network configurations possible.
NOTE
Contact your network manager or Digital service repre-
sentative if you have questions about network configu-
rations.
2–56 Installation