Operator`s manual

Figure 2–34: Form the Upper Cable in a Loop at the DESQA Module
The Digital Network and Communications publications explain the types
of network configurations possible.
CAUTION
Each ThinWire Ethernet segment must have only one
grounding point.
When the ThinWire cable is connected to a DEMPR or DESPR, the
ground is provided by the DEMPR or DESPR chassis. If you are using
a single-segment ThinWire Ethernet work area with no DEMPR or
DESPR, you may need to ground the ThinWire connector on the DESQA
Ethernet adapter.
NOTE
Contact your network manager or Digital service repre-
sentative if you have questions about network configu-
rations.
2–54 Installation