Operator`s manual

6. The ThinWire cable can be connected to any one of the following
devices:
• A DEMPR which, in turn, can be connected to a baseband
Ethernet cable, and can connect up to eight ThinWire segments
in a LAN.
• A DESPR which, in turn, can be connected to a baseband Ether-
net cable, and connects to one ThinWire segment.
• A ThinWire Ethernet adapter located in another VAX 4000,
MicroVAX or workstation.
7. Insert the T-connector into the ThinWire connector on the DESQA
module as shown in Figure 2–33. Push in and turn the T-connector
plug clockwise until it locks.
8. Use a cable clamp to form the upper cable in a loop approximately
10 cm (4 in) in diameter, as shown in Figure 2–34.
Installation 2–53