Operator`s manual

Use the cable clamp to form the forward cable in a loop approxi-
mately 10 cm (4 in) in diameter as shown in Figure 2–27.
Figure 2–27: Form the Forward Cable in a Loop at the Console Module
3. The ThinWire cable can be connected to any one of the following
devices:
• A DEMPR which, in turn, can be connected to a baseband
Ethernet cable, and can connect up to eight ThinWire segments
in a LAN.
• A DESPR which, in turn, can be connected to a baseband Ether-
net cable, and connects to one ThinWire segment.
• A ThinWire Ethernet adapter located in another workstation.
The Digital Network and Communications publications explain the types
of network configurations possible.
2–44 Installation