Operator`s manual

2.6.2 Connecting Parallel Printers
You can connect up to two parallel printers for each LPV11 module
installed in the system. Connect parallel printers to the LPV11 module
as follows:
1. Find the BC27L–30 cable (see Figure 2–17).
Figure 2–17: BCL27L–30 Cable
MLO-007126
2. Feed the socket end of the BC27L-30 cable under the cable manage-
ment bracket from the back of the cabinet.
3. Insert it into the connector labeled J2 on the LPV11 module cover
(see Figure 2–18). Lock the connector into place by using the bail
latches.
4. Insert the other end of the BC27L-30 cable into the printer.
2–32 Installation