Operator`s manual

Figure 2–15: Connecting to the Cable Concentrator

To Terminals

and Printers

Modular

Jack

MLO-007123

5. If you have not already done so, connect the remote terminal or

printer to the other end of the cable. The terminal or printer

documentation shows how to connect the cable. If the printer or

terminal does not have a modiﬁed modular jack connection, use a

passive adapter (H8757–A for 25 pin and H8757–B for 9 pin).

Follow the same procedure for connecting a second BC16D cable to the

CXA16, except insert the cable into the connector labeled 0–7.

2–30 Installation