Operator`s manual

Figure 2–12: BCD16 Cable
Concentrator
BC16D Cable
H3104 Cable
MLO-007120
2. Feed the connector end of the BC16D cable under the cable man-
agement bracket from the back and insert it into the connector (see
Figure 2–13). If you are going to connect both BC16D cables, connect
the first to the connector labeled 8–15 on the CXA16 module cover.
If you are going to use only one BC16D cable, connect the cable to
the connector labeled 0–7. Lock the connector into place by using the
bail latches shown in Figure 2–13.
Installation 2–27