Operator`s manual

13. Remove the two DSSI and two SCSI cables from the storage back-
plane (see Figure 3–3).
CAUTION
When removing the storage backplane assembly, be
sure that the all connector extractors will not be in-
terfering with the side of the chassis as the assembly
is removed from the chassis.
14. Remove the two cables (P/N 17-02954-01 and 17-02954-02) from the
storage backplane.
15. Unplug the four power card connectors from the storage backplane
(pull the cables down and away from the storage backplane). See
Figure 3–3.
3–6 Maintenance