Operator`s manual

4. Select a language by typing the number corresponding to your choice
and pressing
Return
.
NOTE
If you do not select a language within 30 seconds, the
system defaults to English (United States/Canada).
Figure 2–50: Language Selection Menu
KA670-A Vn.n VMB n.n
1) Dansk
2) Deutsch (Deutschland/Österreich)
3) Deutsch (Schweiz)
4) English (United Kingdom)
5) English (United States/Canada)
6) Español
7) Français (Canada)
8) Français (France/Belgique)
9) Français (Suisse)
10) Italiano
11) Nederlands
12) Norsk
13) Português
14) Suomi
15) Svenska
(1..15):
After you select a language, the system runs power-up self-tests. Within
a few moments, the console terminal should display a series of numbers
as the system tests itself.
Figure 2–51 shows the console terminal display after self-tests have com-
pleted successfully. If the self-tests do not start or complete successfully,
the system may have a problem. For instructions on finding the source
of the problem, refer to the VAX 4000 Troubleshooting and Diagnostics
manual.
Installation 2–75