Technical data

VAXserver/MicroVAX 3500/3800 Conversion
2.2 Unpacking the Kit
2.2 Unpacking the Kit
To unpack the kit:
1. Make sure there is no external damage to the shipping container, such as
dents, holes, or crushed corners.
2. Unpack the conversion kit and check its contents against the shipping
invoice.
Caution
Wear an antistatic wrist strap and use an antistatic mat during module
handling to prevent static discharge and damage to modules. The wrist
strap and mat are in the antistatic kit in the Digital Services toolkit.
3. Unpack the CPU module and place it on the grounded antistatic mat.
4. Save the packing material to use when you return the old module to
Digital.
5. If any item is missing or damaged:
a. Contact the customer’s sales representative.
b. Contact the customer’s delivery agent.
2.3 Before Installing the Kit
Before installing the kit:
1. Have the customer back up the system software before the Digital Services
representative arrives. It is the customer’s responsibility to back up the
system software.
2. Turn on the system power and run diagnostics to verify system operation.
3. Turn off the system power before installing the kit.
VAXserver/MicroVAX 3500/3800 Conversion 2–3