Technical data

VAXserver/MicroVAX 3300/3400 Conversion
1.4 Installing the Kit
10. If memory needs to be upgraded, remove the module covers from the
remaining memory module slots.
11. Remove the 50-pin daisychain memory cable that connects the memory
modules to the CPU module, if applicable.
12. Install the new memory modules, if applicable, and reconnect the 50-pin
daisychain memory cable.
13. Reconnect the memory modules and DSSI cables to the CPU module.
14. Reconnect the CPU I/O panel and install over slots 1 and 2.
15. Reinstall the module covers over memory module slots.
16. Attach the new CPU and memory labels to the CPU I/O panel as shown in
Figure 1–4.
17. Attach the new CPU and memory labels, if applicable, to the memory
module covers as shown in Figure 1–4.
VAXserver/MicroVAX 3300/3400 Conversion 1–7