Technical data

VAXserver/MicroVAX 3300/3400 Conversion

1.3 Before Installing the Kit

Before installing the kit:

1. Have the customer back up the system software before the Digital Services

representative arrives. It is the customer’s responsibility to back up the

system software.

2. Turn on the system power and run diagnostics to verify system operation.

3. Turn off the system power before installing the kit.

1.4 Installing the Kit

To install the conversion kit:

1. Turn the front panel key switch to the bottom position, lower the access

door, and turn the power switch on the CPU box to off (0).

2. Turn off the system power to any expander boxes connected to the system.

3. Remove the front panel as shown in Figure 1–1.

VAXserver/MicroVAX 3300/3400 Conversion 1–3